Bitumen Emulsion

ACP-DMT Sdn Bhd manufactures and provides all types of cationic bitumen emulsion from slow to rapid set emulsion, with bitumen content ranging from 38% to 70%, in accordance with local and international standard at affordable prices.

*We are able to produce based on your requirements.

Tack Coat

 
Info
AlloyMTD DJ Bituminous Tack Coat is a thin layer of bituminous liquid asphalt used to provide bonding for old and new asphalt layers. The proper application of tack coat may increase the strength of pavement structure. A loss of bond between hot mix asphalt may result in crescent-shaped slippage cracks or debonding that leads to reduced pavement life.
Features
  1. High quality products
  2. Wide range of Cationic grade
  3. Manufactured according to MS 164:1994, BS 434 BS 434-1 (1984), ASTM D397
  4. Competitive pricing
Manufactured according to :
  1. Malaysia Standard – MS 164:1994 – Specification for Cationic Bitumen Emulsion for Use in Pavement Applications
  2. British Standard – BS 434 BS 434-1 (1984) - Specification For Bitumen Road Emulsions
  3. American Standard ASTM D397
Application
Tack coat cationic bitumen emulsion can be use at ambient temperature at the spray rate of 0.25 to 0.55 litres/m2.
Specification

Prime Coat

 
Info
AlloyMTD DJ Bituminous Prime Coat is an application of a low viscosity asphalt to a granular base in preparation for an initial layer (or a surface course layer) of asphalt and it helps to reduce dust.

In the case of a base, which is to be covered with a thin hot mix layer or a chip seal for low volume roadway, priming ensures a good bond between the seal and the underlying surface which otherwise would have tendency to delamite.
Features
  1. High quality products
  2. Wide range of Cationic grade
  3. Manufactured according to MS 164:1994, BS 434 BS 434-1 (1984), ASTM D397
  4. Competitive pricing
Manufactured according to :
  1. Malaysia Standard – MS 164:1994 – Specification for Cationic Bitumen Emulsion for Use in Pavement Applications
  2. British Standard – BS 434 BS 434-1 (1984) - Specification For Bitumen Road Emulsions
  3. American Standard ASTM D397
Application
Prime coat SS-1K/CSS-1 cationic bitumen emulsion is sprayed at ambient temperature at the rate of 0.50 to 1 litres/m2.
Specification
K1-40

Bitumen Content : 38%
Suggested Used : Tack Coating

RS-1K
Bitumen Content : 50%
Suggested Used :
  • Tack Coating
  • Penetration Macadam
RS-3K
Bitumen Content: 65%
Suggested Used: Tack Coat
SRS B
Bitumen Content: 60%
Suggested Used: Soil stabilization and crack sealant
Neomed
Bitumen Content: 60%
Suggested Used:
  • Surface Active
  • Membrane Interlayaer
RS-2K
Bitumen Content: 60%
Suggested Used:
  • Tack Coating
  • Penetration Macadam (Semi Grouting)
Ralumac
Bitumen Content: 60 %
Suggested Used: Microsurfacing Application System
SRS C
Bitumen Content: 60%
Suggested Used: Soil Stabilization
SS-1K
BITUMEN CONTENT: 57%
Suggested Used:
  • Prime Coating
  • Slurry Seal

ADDRESS

FACTORY
Lot. 19, Lengkongan Hishamuddin, Kaw. 20
PKNS Industrial Site, Selat Kelang Utara
42000 Pelabuhan Kelang, Selangor, Malaysia
Operating Hours : 8:30am-5:30pm (Mon-Fri)
8:30am-1pm (Sat)

email :  sales.acpdmt@mtdgroup.com.my 

Visitor Counter

0.png0.png0.png5.png9.png5.png3.png